Description

Electronic double column dynamometer (CRE), thanks to its maximum capacity, which reaches 5.000 kg (50 kN), the instrument is also suitable for testing technical, geotextile, non-woven and industrial fabrics in general.

The movement of the crosspiece is achieved by 2 ball screws and a reinforced structure with guide columns, which prevent any deformation of the structure.

Working speed: from 0,5 mm / min. at 500 mm / min.

Maximum crosshead stroke: 1200 mm. (without clamps).

Internal width between the 2 columns: 400 mm.

With the appropriate software modules it is possible to perform traction, compression, laceration, delamination, adhesion, sliding of seams and hysteresis cycles, according to the provisions of the various International Standards.

Accessories:

• PC, printer, monitor.
• Load cells 2 daN (kg.), Accuracy 0,05% Cod. ME2515.276
• Load cells 10 daN (kg.), Accuracy 0,05% Cod. ME2515.280
• Load cells 100 daN (kg.), Accuracy 0,05% Cod. ME2515.282
• Load cells 500 daN (kg.), Accuracy 0,05% Cod. ME2515.283
• Load cells 1.000 daN (kg.), Accuracy 0,05% Code ME 2515.284
• Load cells 5.000 daN (kg.), Accuracy 0,05% Cod. ME2515.288
• Wide range of interchangeable terminals available for yarns and fabrics, both mechanical and pneumatic.
• Mechanical Extension Device: external strain gauge for additional stretch control on very rigid samples with low intrinsic stretch.

Weight: 322 kg.

Dimensions: 90x60x190 h. cm.

Power supply: 115 or 230 Vac, 50/60 Hz, single phase

Reference standards: UNI, UNI EN, UNI EN ISO, ASTM, M&S, NEXT, JIS.

ISO 17025 Calibration Certificate (Accredia - ILAC) available on request.